Apco Infratech is building a sea link off Mumbai's western shore
Off Mumbai's western coast, 900–1,800 m out to sea, a joint venture led by Apco Infratech is building the Versova–Bandra Sea Link for the Maharashtra State Road Development Corporation (MSRDC): a 17 km, eight-lane bridge founded on about 3,000 piers, with a cable-stayed span and navigation bridges [1][2][4][5]. Working from a fleet of jack-up barges through every dry season, the team had installed 1,200 piles and cast 3,000 of the deck's 14,000 precast segments by February 2026, and launching gantries were erecting deck at Bandra, Versova and Carter Road by April [3][4].
Since 2022, Sealinkers has supported Apco Infratech's sea link work fronts with steel wire rope for piling rigs and gantries, wire rope and chain slings up to 65 tonnes, polypropylene mooring ropes up to 80 mm, open-link chain, galvanised shackles up to 55 tonnes, hoists and webbing slings. This case study tells the story of the sea link, how we have supported it, and what marine bridge work asks of rope and rigging.
The project: a bridge built from the sea
- Length. About 17.2 km including connectors, with a main sea bridge of about 9.6 km and four connectors to the shore at Bandra, Carter Road, Juhu Koliwada and Versova [1][2][3].
- Structure. About 3,000 piers at roughly 60 m spacing carry a deck about 12 m above sea level [4]. The structure includes a 300 m cable-stayed bridge with a 150 m main span and navigation bridges with 100 m main spans [5].
- Foundations from barges. Piles, pile caps and piers are built in the sea from temporary trestles and a fleet of jack-up barges, which grew from 10 to 12 by February 2026 [3]. By then 1,200 of about 3,000 piles were in [3].
- Precast deck. The deck is about 14,000 precast segments, 3,000 of them cast by February 2026 [3], erected by launching gantries that were working at Bandra, Versova and Carter Road in April 2026 [4].
- Monsoon window. Offshore work stops from June to the end of September every year [3].
- Status. Civil progress was 32% in April 2026 [4]; the redesigned project, now costed at Rs 18,120.96 crore, targets completion in 2028 [6].
How Sealinkers supported Apco Infratech
We have kept the sea link's work fronts supplied since 2022, including the Bandra site below the Rajiv Gandhi Setu and the Carter Road (Otters Club) connector, across four scopes of work:
Wire rope for piling rigs and gantries
Usha Martin 6x36 steel-core wire rope from 16 mm to 36 mm, and rotation-resistant 35x7 rope for piling-rig and gantry hoists — including compacted 35x7 rope to EN 12385-4, supplied with the mill test certificate, for a launching gantry at the Otters connector. Piling rigs and gantry hoists lift on a single fall, which is why rotation resistance matters. See our wire rope construction guide.
Wire rope slings and chain slings
Ferrule-secured single-leg wire rope slings from 6 mm to 70 mm (working loads up to 65 tonnes), two- and four-leg slings with master rings, galvanised and ungalvanised, and one-, two- and four-leg alloy chain slings up to 28 tonnes.
Mooring and marine rope
Garware and Tuf eight-strand polypropylene ropes from 48 mm to 80 mm for barge mooring and marine work, three-strand polypropylene rope and nylon rope, and U2-grade galvanised open-link chain with swivels. See our guide to mooring rope selection.
Hardware and handling
Hot-dip galvanised bow and dee shackles up to 55 tonnes, snatch blocks, galvanised turnbuckles up to 2¾ inch, plate-lifting clamps, swivel hoist rings, Titan chain pulley blocks up to 10 tonnes, ratchet lever hoists, wire rope pulling-lifting machines, an electric winch, and Zebra polyester webbing slings up to 20 tonnes.
Selected consignments were inspected by a third party, IRS, at the client's request.

What marine bridge work asks of rigging
Salt water and wet storage
Everything on a sea link is wet and salty. Galvanised rope, shackles, turnbuckles and chain last longer, and rope needs regular lubrication. Synthetic mooring ropes do not corrode but do suffer from UV and abrasion on barge fairleads and bitts. See wire rope lubrication and polyester vs polypropylene rope.
Rope that does not spin
A piling rig or gantry lifting on a single fall needs a rotation-resistant rope such as 35x7. A standard six-strand rope under a single fall can unlay and spin the load. The equipment maker's rope specification — construction, grade, diameter and length — should be copied onto the purchase order.
Mooring is rigging too
Jack-up and flat-top barges, floating plant and work boats are held by mooring lines, chain and anchors. Mooring ropes are a consumable on a marine spread: they chafe, kink and age, and a contractor should hold spares through the working season. The HMPE mooring and towing lines guide covers when a fibre upgrade makes sense.
Certificates and inspection
Marine clients and class societies want certificates for each rope, chain and sling. Our slings and assemblies are proof-load tested at our in-house test house on a 1,200 T proof-load test bed, and we arrange third-party inspection — IRS, ABS, LRS or BV — where the client asks for it. See proof-load testing.
Lessons for marine construction buyers
- 1. Galvanise by default for rope, shackles, turnbuckles and chain on a sea site.
- 2. Specify rotation-resistant rope for single-fall hoists, by construction and standard, and ask for the mill certificate.
- 3. Treat mooring ropes as consumables and stock spares before the season starts — offshore work stops in the monsoon and restarts at full pace.
- 4. Plan inspection calls into delivery dates where the client requires IRS or another third party.
- 5. Keep each site's stores list current. A long marine project has several work fronts; a running rate contract for standard items saves each front from ordering in emergencies.
Frequently asked questions
What has Sealinkers supplied to the Versova–Bandra Sea Link?
Since 2022 we have supplied Apco Infratech's VBSL sites with Usha Martin wire rope (6x36 and 35x7 rotation-resistant, 16–36 mm), wire rope slings from 6 mm to 70 mm, alloy chain slings, Garware and Tuf polypropylene mooring ropes from 48 mm to 80 mm, open-link chain, galvanised shackles up to 55 tonnes, turnbuckles, chain blocks, lever hoists and Zebra webbing slings.
Which wire rope suits a piling rig or launching gantry?
Single-fall hoists generally need a rotation-resistant construction such as 35x7, often compacted. The equipment maker's specification sets the construction, grade and diameter; we supply to it with the mill certificate.
Do you supply polypropylene mooring ropes for barges?
Yes. We supply Garware and Tuf eight-strand and three-strand polypropylene ropes, nylon ropes and HMPE lines for barge mooring and towing.
Can you arrange IRS inspection?
Yes. We arrange third-party inspection by IRS, ABS, LRS or BV when the client requires it.
Working on a marine project?
Send us your rope specifications, rigging list or mooring plan. We will quote against them, with certificates and any inspection your client needs. Contact Sealinkers, or browse wire rope, wire rope slings, Garware ropes and shackles.
Sources
- [1] Webuild, Versova–Bandra Sea Link project page — webuildgroup.com
- [2] Wikipedia, "Versova–Bandra Sea Link" (revision of 27 March 2026, citing MSRDC and press reports) — en.wikipedia.org
- [3] ThePrint, report on Versova–Bandra Sea Link progress, 18 February 2026 — theprint.in
- [4] Free Press Journal, "Versova–Bandra Sea Link achieves 32 per cent progress", 22 April 2026 — freepressjournal.in
- [5] Webuild, structures of the Versova–Bandra Sea Link — webuildgroup.com
- [6] Swarajya, redesign of the Bandra–Versova sea link gets environmental clearance, 7 April 2026 — swarajyamag.com
Related Guides
Ready to put this into practice?
Every item ships certified, and our in-house test house backs it with the paperwork.
Sealinkers Engineering
Rigging & Lifting Engineering Team
Sealinkers has supplied and certified rigging, lifting and mooring equipment from Darukhana, Mumbai since 1977. These guides are written and checked by the engineers who specify this gear and proof-load it on our own test bed.
- in-house test house — proof-load bed from 1 to 1,200 tonnes
- Proof-load testing and certification in-house since 1977, Darukhana, Mumbai
- Class-society interfaces: IRS, ABS, LRS and BV




